The SLP74LVC125A consists of four non-inverting buffers/line drivers with 3-state outputs (nY) that are controlled by the output enable input (nOE ).
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Inputs can be driven from either 3.3V or 5V devices. When disabled, up to 5.5V can be applied to the outputs.
Inputs accept Voltages to 5V
Operate from 1.2V to 3.6V
CMOS low power consumption
Direct interface with TTL levels
ESD protection:
HBM exceeds 2000V
CDM exceeds 500V
Latch-up performance exceeds 100mA
Specified from -40°C to +85°C and from -40°C to +125°C
Product Name | Package form | Marking | Hazardous Substance Control | Packing Type | Remarks |
---|---|---|---|---|---|
SLP74LVC125AEB | SOP-14-225-1.27 | 74LVC125A | Halogen free | Tube | |
SLP74LVC125AEBTR | SOP-14-225-1.27 | 74LVC125A | Halogen free | Tape & Reel | |
SLP74LVC125AJY | TSSOP-14-225-0.65 | LVC125A | Halogen free | Tube | |
SLP74LVC125AJYTR | TSSOP-14-225-0.65 | LVC125A | Halogen free | Tape & Reel |